How To Fix Replace PSP 1000 Broken Analog Stick Joystick

If the analog stick on your PSP 1000 console is sticking, it can make it extremely difficult to use it to play games because it wont move freely, as its stuck down. The reason why the joystick is sticking is because the internal mechanism, as well as the rubber contact that the stick operates on has become worn out, due to extensive use. The only way you can fix this problem is by replacing the current broken analog stick with a brand new replacement stick. Make sure you use a replacement part that is genuine made from Sony because cheap Chinese copies from Ebay are usually cheaper, but they dont last as long and break more easily. To perform this repair, it will involve you to disassemble your PSP console, so you will require a small sized Philips screwdriver and some basic knowledge on how to repair electronics. Also bear in mind that performing this repair on your PSP 1000 console will void the warranty with Sony.

1) First of all, you will need to remove the front faceplate from your PSP console to access the analog stick. So turn your PSP console upside down, so that the screen and buttons are facing downwards. Then remove the battery cover/lid and remove the battery pack that is inserted into the console. On the back of the PSP, you will see 2 screws, 2 more screws underneath where battery pack goes into and 1 last screw at the bottom of the PSP console, in the middle of the silver bit of plastic that goes around the console, next to a bar code sticker. So using a small sized Philips head screwdriver, individually unscrew all 5 screws.

2) Turn the console around, grab the front faceplate of the PSP console and pull it upwards. Once removed, turn faceplate upside down, you will see the analog stick mechanism, it will have two small screws holding it onto the plastic. So get your small sized Philips screwdriver and unscrew both screws.

3) The old analog stick will now pop off by itself. So get your new replacement analog stick and insert it back into the faceplate the correct way. Then replace the two screws you removed earlier on, this is to secure it down. Once you have done that, reattach the faceplate back onto the front of the PSP console.

4) Turn the console upside down again and insert all the screws removed into their screw holes. Then using your small sized Philips head screwdriver, screw all 5 screws tight. Then reinsert the battery pack back into the PSP console and place the battery lid back on.

Read More..

How To Make Your Xbox 360 Wireless With a Network Adapter

The original model of the Xbox 360 console can only connect onto the internet via a wired Ethernet connection. When Microsoft manufactured it, they didnt include an integrated Wi-Fi feature like the PS3 consoles had at launch. Since many gamers out there wanted to connect their consoles wireless onto the internet, Microsoft later on released an optional Wireless network adapter kit. This is basically an external Wi-Fi antenna that you attach directly onto your console to provide it with wireless connectivity. Once installed, you can connect onto your wireless access point at home and your console will be connected onto the internet, ready for Xbox Live. If you have a slim model of the Xbox 360 the external wireless network adapter kit is not required, since it has it built in.

1) Look at the rear of your Xbox 360 console and look where the TV cable goes into. Look above it, in that area you will see two small slots. These slots are used to hold the wireless network adapter in place. So line up the tabs on the wireless network adapter with the two slots and push it in. This will lock it in place and prevent it from moving.

2) Now that the wireless network adapter is fitted onto the console, you need to connect it via USB. Look at the rear of your Xbox 360, you will find one USB port that is available. Plug in the USB plug from the wireless network adapter into the USB port found on the console.

3) Power on your Xbox 360 console. Then from the Xbox 360 dashboard go into Network Settings. Then select Configure Network >Wireless Mode > Scan For Networks. 

4) Find the wireless access point name from the list of available WI-Fi hotspots that come up onscreen on your TV. Then enter your security password for your wireless router and select Done. It will now attempt to connect onto the Wi-Fi router. If successful the led on the wireless network adapter will turn solid green.

Read More..

Why are Some PS2 Game Discs a Blue Colour

So why do some PS2 game have a blue backs?

Read More..

How To Test a 9 Volt Battery On Your Tongue

An 9 volt square shaped battery is used for all sorts of small powered electronic devices, from fire alarms to kids toys. If you dont have a multimeter or a special tester tool to test your 9 volt battery, you can test it using your tongue. That way you can determine if the 9 volt battery is fully charged or completely dead, using your own judgement tactics. Dont worry about doing this, sticking your tongue on the 9 volt battery is not harmful, you wont get shocked or die from it lol. This is because it hasnt got enough amps and voltage to do so, so lick with full confidence!

1) Stick your tongue out of your mouth.

2) Obtain your 9 volt battery and lick the the two Positive (+) and Negative (-) terminals found on the top.

3) If you feel a little Sting and a Metallic taste on your tongue, on the area you licked it, it indicates that the battery is charged. If you feel no effect what so ever, then the battery is dead and needs replacing with a new one.

Read More..

How To Insert Micro SD Memory Card In Nokia 5233

The Nokia 5233 supports a official maximum memory card size of up to 16 GB. The type of memory card that the phone supports is Micro SD. It is possible to insert a 32 GB Micro SD memory card, but the phone will become really slow to use and will hang often. When choosing a Micro SD memory card, ensure that you choose a good manufacturer like Sandisk or Kingston. Cheap unbranded memory cards have very poor performance and stop working after awhile.

1) Power off your mobile phone before proceeding any further. This is because you dont want to corrupt the data on the memory card.

2) Turn the phone upside down and remove the back battery cover. The best way to do this is to insert your finger nail at the bottom grove and gradually pull it off.

3) Once you have removed the rear battery cover, you will see a Micro SD slot located on the top right hand side.

4) Obtain your Micro SD memory card and carefully insert it into the Micro SD slot on the handset. Be careful not to put in the wrong way round or push it in forcefully. This is because it will either become stuck or will snap, so handle it with extreme care.

5) If the Micro SD memory card is inserted correctly in the slot, you will hear a click sound and it will lock in place. Now all you have to do is refit the battery cover you remove earlier on. 

Read More..

Silent Hunter 5 Battle of the Atlantic Full Version

SilEnt Hunter 5 takEs players behind the periscope 0f a German Type VII U-boat to take 0n the Allied Forces in battles acr0ss the Atlantic Ocean & Mediterranean SEa. Players c0mmand the U-boat as a submarine captain fr0m a first-person view in a campaign that spans 1939-1943.


Sreenshot :

Recommended System Requirements :

OS: Windows Vista,7,8
Processor: Intel Core 2 Duo @ 3.0 GHz / AMD Athlon 64 X2 6000+
Memory: 2 GB RAM
Video Memory: 512 Mb
Video Card: nVidia GeForce 9800 / ATI Radeon HD 3870
Hard Drive: 15 GB HD space
Sound: DirectX compatible.
Keyboard
Mouse
DVD Rom Drive


DOWNLOAD :

VIA PUTLOCKER :

part 1        part 2       part 3       part 4       part 5


VIA UPAFILE :

part 1        part 2       part 3       part 4       part 5

Read More..

Overclocked a history of violence Game

 

Download Free Overclocked a history of violence Game Full

A1298 Overclocked a history of violence

Read More..